Home>Products>AMI Bearing>AMI UETBL209-27W Pillow Block Bearings
AMI UETBL209-27W MODELS
Need a CAD or 3D Model?
AMI UETBL209-27W Pillow Block Bearings
AMI Bearing
AMI UETBL209-27W Bearing SPECIFICATIONS
AMI UETBL209-27W Pillow Block Bearings Warehouse offers car parts and car accessories. -0.21 in a - Effective Center Location4 We 0.31 in Aa - Cage-Cone Backface Clearance sell discount AMI Bearing 14100 lbf Ca90 - Dynamic Thrust Rating (90 million revolutions)7 online as BEARING CORP.OF CANADA LTD. well as cheap machinery parts.
- AMI
UETBL209-27W
- 0.31 in
- 14100 lbf
- -0.21 in
- 23400 lbf
- 1.66
- 6.3750 in
- 81637
- 40800 lbf
-
BEARING CORP.OF CANADA LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
AMI UETBL209-27W Pillow Block BearingsTechnical information
- 0.31 in
- 14100 lbf
- -0.21 in
- 23400 lbf
- 1.66
- 6.3750 in
- 81637
- 40800 lbf
- 98.4
- 0.15 in
AMI UETBL209-27W AMI UETBL209-27W Pillow Block BearingsCross reference
AMI UETBL209-27W bearing Size Chart (mm/inches) | |
---|---|
A | 48 mm |
A1 | 32 mm |
B | 41.2 mm |
d | 44.45 mm |
Dz | 95 mm |
G | R1/8" |
H | 54 mm |
H1 | 21.5 mm |
H2 | 107 mm |
J | 150 mm |
L | 192 mm |
L1 | 54.5 mm |
N | 14mm |
N1 | 29 mm |
s1 | 20.6 mm |
S | 10.2 mm |
Z | 70.3 mm |
C | 31.85 kN |
C0 | 20.8 kN |
T min. | -20 °C |
T max. | 200 °C |
Weight | 2.15 kg |
Recommended tightening torque for set screw | 8 Nm |
Designation of housing | PE209N- |
Designation of bearing | US209-28G2T20 |
Designation of open end cover | SCOU209-28 |
AMI UETBL209-27W INTERCHANGE
AMI Bearing Part series UETBL209-27W is a potential replacement for these common bearing part numbers:
UETBL209-27W
UETBL209-27W
UETBL209-27W
UETBL209-27W
UETBL209-27W
UETBL209-27W
UETBL209-27W
UETBL209-27W
Contact Us

- BEARING CORP.OF CANADA LTD.
- Address2367 Kitima Road, Mississauga, Ontario, L9N 1M6, Canada
- Phone(Working Time)453-298-7877
- Fax
AMI UETBL209-27W Technical Articles
Are ceramic bearings better? |
Can both wheel bearings go bad at the same time? |
Can I replace main bearings without removing crank? |