Home>Products>FAG Bearing>FAG 6003-2RSR-C3 Single Row Ball Bearings
FAG 6003-2RSR-C3 MODELS
Need a CAD or 3D Model?
FAG 6003-2RSR-C3 Single Row Ball Bearings
category
FAG Bearing
FAG 6003-2RSR-C3 Bearing SPECIFICATIONS
FAG 6003-2RSR-C3 Single Row Ball Bearings, 3.438 Inch | 87.325 d Units Pillow Block Bearing Category and Housings CAD models , FAG Bearing Manufacturing Service BEARING CORP.OF CANADA LTD. . Get Inch Inch - Metric Your Free.
- FAG
6003-2RSR-C3
- 3.438 Inch | 87.325
- Pillow Block Bearing
- Inch
- 0.0
- TIMKEN
- 12.875 Inch | 327.02
- Triple Lip Urethane
- 22220
-
BEARING CORP.OF CANADA LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
FAG 6003-2RSR-C3 Single Row Ball BearingsSystems
- 3.438 Inch | 87.325
- Pillow Block Bearing
- Inch
- 0.0
- TIMKEN
- 12.875 Inch | 327.02
- Triple Lip Urethane
- 22220
- 31171511
FAG 6003-2RSR-C3 FAG 6003-2RSR-C3 Single Row Ball BearingsTechnology
FAG 6003-2RSR-C3 bearing Size Chart (mm/inches) | |
---|---|
A | 49 mm |
A1 | 16 mm |
A2 | 35 mm |
B | 49.2 mm |
A5 | 30.2 mm |
d | 45 mm |
Dz | 95 mm |
G | M6x1 |
H | 117 mm |
H1 | 102 mm |
H2 | 83 mm |
L | 144 mm |
L1 | 87 mm |
L2 | 16 mm |
L3 | 83 mm |
N | 29mm |
N1 | 19 mm |
N2 | 49 mm |
P | 300 mm |
s1 | 24.6 mm |
S | 19 mm |
SW | 4 mm |
Z | 70.2 mm |
C | 31.85 kN |
C0 | 20.8 kN |
T min. | -20 °C |
T max. | 100 °C |
Weight | 2.35 kg |
Recommended tightening torque for set screw | 11.5 Nm |
Designation of housing | T209N- |
Designation of bearing | UC209G2 |
Designation of open end cover | SCO209-45 |
FAG 6003-2RSR-C3 INTERCHANGE
FAG Bearing Part series 6003-2RSR-C3 is a potential replacement for these common bearing part numbers:
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
6003-2RSR-C3
Contact Us

- BEARING CORP.OF CANADA LTD.
- Address2367 Kitima Road, Mississauga, Ontario, L9N 1M6, Canada
- Phone(Working Time)453-298-7877
- Fax
FAG 6003-2RSR-C3 Technical Articles
Are ceramic bearings better? |
Can both wheel bearings go bad at the same time? |
Can I replace main bearings without removing crank? |